SkrPi Desktop Electronics Case for 3D Printers

The SkrPi Desktop features everything the standard SkrPi does. The mojor differences are as follows.

1. Has a cover and feet so that it can be used as a standalone enclosure.
2. Feet serve to allow the intake fan to draw air from the bottom of the case.
3. There is a vertical stand that lets you mount the SkrPi Desktop in a standing configuration

Otherwise here are the notes on the SkrPi.

The SkrPi is an electronics enclosure that is designed to be mounted under an enclosure and still give access to usb and sd on both mainboard and the pi.

The hole patter fits skr mini boards and original creality ender boards where an skr is a drop in replacement.

This Pi mount was designed for the pi 3b+. However, the screw pattern for a pi 4 is the same. Just keep in mind that the IO on a pi 4 is different and you may need to alter the front ports if you need pi 4 support.

Fan mount fits a 4010 fan so stock ender fan will do fine.
Horizontal fan mount reduces case height which decreases footprint, print time and reduces the volume of air that needs to be moved.

Enclosure mounting holes are 3mm with up to 6mm bolt head clearance.

There are two sets of feet depending on clearance needs for your fan.