SkrPi Electronics Case for 3D Print Enclosures V1.2.5

1.2.5 Updates to the SkrPi are as follows.

1. Improved air vent optimized to reduce overhang on the print.
2. Reduced mounting angle on corner mounts.(Also for printability)
3. Internal intake cover (Also also for printability)
4. Zip tie slots for wire management
5. Power button cover plug for those who don't need it.
6. Slightly expanded dimension on the x axis for wire management 

The rest is the same as version 1.2 info below.

The SkrPi is an electronics enclosure that is designed to be mounted under an enclosure and still give access to usb and sd on both mainboard and the pi.

The hole patter fits skr mini boards and original creality ender boards where an skr is a drop in replacement.

This Pi mount was designed for the pi 3b+. However, the screw pattern for a pi 4 is the same. Just keep in mind that the IO on a pi 4 is different and you may need to alter the front ports if you need pi 4 support.

Fan mount fits a 4010 fan so stock ender fan will do fine.
Horizontal fan mount reduces case height which decreases footprint, print time and reduces the volume of air that needs to be moved.

Offers stackable buck converter trays.(Stackable with bolts)

Enclosure mounting holes are 3mm with up to 6mm bolt head clearance.

Enjoy!