Honda Ruckus "Finkelberry" frame beautifier

Inspired (obviously) by the MNNTHBX dingleberry, but without a plate mount and with modified styling. When you grind…
4
22
0
514
updated June 2, 2022

Description

PDF

Inspired (obviously) by the MNNTHBX dingleberry, but without a plate mount and with modified styling. When you grind the rear frame's stock plate and rear light mount off a Honda Ruckus you're left either needing to immediately prep and paint or to cover it up. This part is just wide enough that if you grind judiciously you will be able to cover up the ground area.

Print them and use them but please don't try to sell them. There's enough post processing to make them pretty that it defeats the purpose, and if someone wants to buy one send them to www.mnnthbx.com for the original.

Instructions

3d print at least at 20% infill. There will be post processing required to get the part looking nice. Don't bother with xtc-3d, just use Bondo spot/glazing putty, a couple layers with sanding should do it. I suggest printing with 3-4 outer lines since post processing may wipe out some of that.

Category: Automotive

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License