Tube Holder for Flashforge Creator Pro

Optimized tube holder for Flashforge Creator Pro. Stops Filament from getting tangled and can connect PTFE-tubing.
4h 46m
1× print file
0.15 mm
0.40 mm
38.00 g
6
40
0
234
updated May 29, 2022

Description

PDF

This is a tube holder which improves the uncoiling of the filament on the Creator Pro from Flashforge. PTFE-Tubing with an outer-diameter of 6 mm can be connected easily for a closed filament path. 

Update: 

The imperfections on the entry for the filament are removed in the stl and gcode files.

Disclaimer: 

This part does not work with the top cover installed and the original length of Filament guiding tube. Either the tube has to be shortened or the lid can't be used.

Print Settings:

  • without supports.
  • 2 shells
  • 18 % infill.
  • I used Extrudr PETG 
  • on the smooth PEI-Sheet from Prusa 
  • without any adhesive, however on the textured or satin sheets there might be a need for adhesive.

Tags



Model origin

The author hasn't provided the model origin yet.

License