Alphabet Letter Refridgerator Magnets

Set of 26 alphabet letters with an extra exclamation point! With an indent to add a small round magnet.

Great to try out color changing when printing the edge. The GCODE files are one full solid color but you may add a color change with the STL files using the slicer. The GCODE files also have ironing set up for a nice smoother surface and if you wish for a shorter print, you might want to slice the STL files instead.

Prints without supports just fine.

General letter sizes are y=50mm and z=6mm.
The magnet hole size: 6mm x 2mm with tolerance of 0.127mm

Wasn't sure about the magnet hole placement, hence why some models have 2 holes. Might need to be reworked depending on the magnet strength.

Filament used in the picture: Fillamentum Crystal Clear Blue PLA and Overture White PLA