Standing Case for Raspberry Pi Zero and Waveshare 2.7 ePaper Hat

I was unable to find a portrait oriented case for the Waveshare 2.7 inch ePaper display, everything I found was landscape oriented so I decided to create one myself.

I also wanted access to the memory card without taking the case apart so I decided to add an opening at the bottom of the case to allow easy access to it.

Print Settings

Printer Brand:

Creality

Printer:

CR-10S

Rafts:

Yes

Supports:

Yes

Resolution:

0.2

Infill:

20%

Filament: esun PETG Black

Notes:

Supports only touching build plate

Required cleaning up supports

How I Designed This

• Imported the original stl into Tinkercad
• Rotated the case 15 degrees backwards to enable easy reading
• Added a base to support the case
• Added an opening to allow access to the memory cars