Raspberry Pi and Camera holder for K8800

This is my design to mount a raspberry 3 with camera to my 3D Printer (Velleman K8800). The camera can be oriented by the loc-line. There are two types of loc-line, the normal one and the one with a mount for the camera cable.

For better printing the locline and the raspberry pi holder and camera lid are seperate parts to be glued together. I also added a helper part, which makes it easy to assemble the loc-line with a plier.

Used the Loc-Line from https://www.thingiverse.com/thing:9006.

Holder inspired by https://www.thingiverse.com/thing:2982981.

Print Settings

Printer:

Vellemann K8800

Supports:

No

Resolution:

0,2

Infill:

20%