Large Chess/Checker Board

A Large Chess Board. 

Print with supports from bed only (for white square overhang) Only need for centers and middle. Should remove easily. Do not use brim (because of size). I did use wind shield (extended.)You will need two (2) of each part except “Middle.” Works well with PLA & PETg. The Square is to level the board and cover seems. Obviously, you will need thirty-two (32) if you decide to use (optional.)

Used Top Left as a White Corner for reference.

Suggestions to make: first cut cardboard at least 480mm by 480mm.

Also recommend printing 60x60x.4 Black squares to level the board. (Place on top of printed ones. Can also use different color combinations to add artistic touch.

Added a glass and frame, either by getting a cheap one from Goodwill (most probably require resizing) or frame store (like Hobby Lobby) or online.