Wanted a dust cover for my Korg Volcas - ended up with this thing where you can store them easily as a stack.
There is no need to remove the shroud if you are using them. I found it convenient to leave them on as a hand rest and it also protects the knobs.
If you are more interested in a classic dust cover design there are also two alternatives.
All versions are a tight fit so they can't fall off easily.
The files:
Volca Cover stack - this is the main file. It is the stackable shroud.
Volca Cover stack lid - this is a lid to fit on top of the uppermost shroud.
Volca Cover - is a classic cover which needs to be taken off to use the Volca.
Volca Cover Frame - this just a cover frame. Cut or saw a small plate (e.g. wood) with the dimensions of the frame and glue in on top. This spares the IMHO awkward print of a large plate on the 3d printer.
Rafts:
Doesn't Matter
Supports:
No
Resolution:
as you like
Notes:
Print as shown without support. Everything will be easy printable - even the cover stack lid should work well by bridging the gaps.
Category: MusicThe author marked this model as their own original creation. Imported from Thingiverse.