Cable clips (for bycicles, pipes, etc.)

A simple set of cable clips (for bikes or pipes in general).

First number in the model name is the pipe diameter in millimeters, second (and possibly third, some holders are designed for two cables) is the cable diameter in millimeters.

Scale the height as needed: 10-15 mm seems enough in most cases, but if you need a stronger holder, use more.

I designed this for my homemade e-bike ...

Print Settings

Printer:

Craftbot original

Rafts:

Doesn't Matter

Supports:

No

Resolution:

Any

Infill:

None

Notes:

Any normal printing material should do, but increase hot-end temperature a bit to prevent the print from cracking when snapping it on.
Scale height according to personal taste.