This is a pair of replacement pulleys for a series of old Sears Craftsman 4" Belt Sanders.
They replace Sears Part # 814105 Lower Timing Pulley & Sears Part # 814106 Upper Timing Pulley.
These are made available for non-commercial use.
Printer:
Monoprice Mini
Rafts:
No
Supports:
No
Resolution:
.175mm-.2mm
Infill:
100%
Notes:
I used 100% infill because they're so small, but I'd feel safe with 50% infill. (If you use less than 100% infill, set Wall Thickness to 1.5mm. That will insure the teeth are completely filled.)
Category: PartsThe author marked this model as their own original creation. Imported from Thingiverse.