1830 - Game Component Organizer

This is my take on an 1830 Game Component Organizer. It's designed for the first Lookout Edition of 1830 and here it should fit snugly into the box. 

My edition of 1830 contains a lot of game variants with extra tiles. I've designed the inlays such that all the tiles for the standard games fit into the six hex_inlay_a boxes, and the tiles for the variants can be sorted into the five hex_inlay_b boxes as you like. Hopefully that streamlines game setup.

If you've got other editions or variants, I've included the OpenScad sources so you can easily remix it for your needs. Enjoy.

This is what you need to print:

1x money_holder (should fill all the paper money)

6x hex_inlay_a (should fill all the standard hex tiles)

1x card-holder (at least one box per public company)

2x token-box-a (one compartment per public company)

5x hex_inlay_b (should fill all the additional tiles for game variants)

2x token-box-b (for putting all the additional token and marker)

1x top-layer-box (storage for the public company charters)

“Infill-Only-Bottom" Effect for Hex-Inlays (a and b)

There are two modifier meshes you can use if you want to have the bottom of the hex-inlays in a hex-grid. See here for instructions