2.5 Inch HDD/SSD Caddy for multiple drives

Inspired by a model at thingiverse (https://www.thingiverse.com/thing:3544454) But needed something to be laser cut. 

Designed to enclose the drives, which is why the ends are not symmetrical. You will (obviously) need two identical parts and 4 regular M3x6 caphead screws (or you can countersunk the holes) for each drive. Due to 12mm spacing, should fit the thicker 8mm SSD:s with ease and still leave some gaps for air. 

Made parametric, though the hexagonal pattern only works for 12 mm spacing (at least for now). Included 4 and 8 drive versions and the original ipt-file (Autodesk Inventor).

I have not 3d-printed these, only lasercut, so if you end up printing these, a make and feedback would be great! The model is 3mm thick as I laser cut it from 3mm acrylic.

Made this for a friend. Pictures are from him.