Weyland Yutani - UD4L Cheyenne (Aliens)

This is an updated version of my Aliens Dropship.

This one is scaled to 300mm and fully printable. It is print verified.

May 2022 Update

• Added a complete zip file.  The import from Thingiverse left a lot of files out.  Please download the .zip and extract (includes decals and other parts).

April 9, 2019 Update

• Added New_Body_Split - which has slot for the upper missle wings to slide into. Use this cut of the body if you plan to have it in attack mode
• NewMissleWings - use these upper missile wings if you are building it in attack mode

To join the upper missle pods to the wing, but some 1.75mm filament. If you scale it, scale a small cylinder of 1.75 to the same %
Notes:

The nose at 300mm will need to be DLP/SLS printed. You can give FDM a try with a .25mm nozzle

• The Missle Pod Wings - there is a version included that will angle them up
• Missle Pod Wings - missiles might be a little challenging to print. I am doing it on a DLP printer
• Gear Down and Gear Up included
• Decals are included. .AI so you can scale as needed. You may need to mess with it a little if you scale it. It is all vector.
• All parts should fit together nicely.
• Enjoy!

Print instructions

Category: Vehicles Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: Doesn't Matter

Supports: Yes

Resolution: .2mm

Infill: 10%

Filament: Amazon Basic PLA Silver
Notes:

Please ensure your printer is dialed in. It will save you a lot of time.