I built a gaming table topper using series 15 extruded aluminum following the parts list and method from this video.
https://www.youtube.com/watch?v=etzGon_lGlw
I wanted a roll-in cup holder so I made this out of PETG. I didn't want to spend the money from the parts list in the video for the cup holder though it is nice.
I made this with tinkercad.
Printed using a .8 nozzle with .6 layer height so results may vary if using a different size nozzle. I recommend printing it on its side for better strength through the bracket part.
Print Settings
Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
.6
Infill:
25%
Filament brand:
Inland
Filament color:
Red/grey
Filament material:
PETG
Notes:
Wall line count: 4
Skin overlap percentage: 25
Infill line multiplier: 2
Build plate adhesion type: Brim
Generate support: yes
Support structure: tree
The author marked this model as their own original creation.