Anet A8 30A (360watt) PSU Upgrade

Anet A8 comes standard with 20A (240watt) PSU. Upon the stock PSU dying, a 30A (360watt) PSU was purchased to replace: https://www.amazon.com/gp/product/B00D7CWSCG/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

30A PSU does not fit stock frame holes, so a mounting frame was created. Also, had to remix/redesign the switch cover. I took a preexisting cover design (https://www.thingiverse.com/thing:2320216) and modeled it to fit the PSU above.

Additional Frame Components:

3 - M3 nuts - press fit into frame first

4 - M3x8mm SHCS - Mounts frame to PSU

3 - M3x16mm SHCS or Phillips screws Mounts Frame/PSU combo to Anet Frame

Additional Switch Cover Components:

2 - M4x8mm Screws to mount cover to side of PSU

1 - switch assembly: https://www.amazon.com/gp/product/B00ME5YAPK/ref=oh_aui_detailpage_o08_s02?ie=UTF8&psc=1

Print Settings

Printer:

Anet A8

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

40% Zig-Zag

Notes:

Layer Height: 0.2mm
Wall Line Count: 3

Printed in PLA

How I Designed This

Designed in PTC Creo 4.0.

3aug2018:

Frame Rev 2 - Modified M3 nut to be 5.6mm across for 5.43mm stainless steel nut. Have not tested for press-fit or slip-fit tolerances yet.

30june2018:

Frame Rev 1 - Corrected M3 nut bosses to be 6-sided.

Cover Rev 0 - Original design was from 20 watt PSU. Updated model to fit 30 watt PSU