Modular component storage

This is a small modular cabinet with side rails and top/bottom indentations/extrusions for interlocking and stacking multiple cabinets together :)

The cabinet module is roughly 100x45x120mm (WxHxD) not counting the side rail (1.5mm) and bottom feet (1mm).
It features 2 horizontal slots for drawers.

There are 4 available drawer sizes to choose from with several variations of internal compartments each (1-4). The number of internal compartments for each drawer is indicated by the _Yxh suffix where Y is the number of available compartments. Each separator is 1mm thick so you can do the math how much space gets lost ;)

Internal drawer width:
big - ~93mm
normal - ~45mm
small - ~ 21mm
tiny - ~ 9mm

All of the above have a usable depth of ~116 mm (not counting separators) and height of ~17mm.

In each cabinet slot you can fit:
1x big OR 2x normal OR 4x small OR 8x tiny

Or... you can also mix and match them however you like :)

Print instructions

Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 10%

Infill density in the PETG gcode files has been tuned for minimal retractions during printing.

Make sure to keep that in mind as some infill settings may result in quality loss if your retraction settings are not perfectly set.