A non commercial fan art miniature model of the pokemon Haunter. Ghost Pokémon number 93.
2h 38m
6× print file
0.15 mm
0.40 mm
14.00 g
186
289
1
5735
updated May 17, 2022

Description

PDF

Gotta print 'em All! 

This model is free. If you appreciate this model, please leave a download and a like! 

A 3D sculpted model of the Pokémon Haunter. 
Are you up for a challenge? This is a fast printing small model. The pictured model is printed at 0.15 mm layer height on a stock Prusa Mini+. The completed miniature is 40x40x55 mm.
This is a multicolor print using a single extruder.
The .3fm/gcode names describe the parts and colors. The base with hands gcode has a pause for the color changes at the correct heights. 
Transparent 1.75 mm filament is used to hold the parts upright. You can also use a piece of metal wire/paperclip for this. The holes for the filament are already present in the model. Depending on the precision of your printer, you might need to use a small drill to make the filament hole a bit bigger. As this a very small model, be careful when cutting away the support. Do not pull the support, you might break a tiny part. Be gentle when inserting the white part into the head. You might need to use a bit of sandpaper after removing the support. 

Created in Nomad Sculpt based on my Red Devil sculpture also available on Printables.
https://www.printables.com/model/204396-flying-red-devil-demon-monster-miniature

This is a piece of noncommercial fan art. No copyright infringement intended. Pokémon and all its characters are property of Nintendo. Not available for commercial use, for personal use only. This is a not-for-profit fan art model!

Tags



Model origin

The author marked this model as their own original creation.

License