Dart Zone/Adventure force Matrixfire Muzzle Delete

Cut down your MatrixFire for a more compact form factor!  Can be used with either the hopper or the magazine adaptor.

Update 27Dec2022: Cleaned up tolerances.  Added Nightingale style brake.  Added detailing

Added Brake that actually makes sense.  Included Slug's pyrangle foregrip with fixed geometry specific for this system.

STEP file included.

Printing

-Orientation: as it is in the file

-Walls: Main piece: at least 3

Brake: at least 3 PLEASE PRINT IN ORANGE

Rails: at least 2            

-Infill: 20 

-Supports: Main piece: No

            Rails: No

            Brake: Maybe.  Print completed without them (for me) but had some loose filament across the muzzle.  Could be cut away with flush cutters.  Or just use supports.

-Post processing: The brake piece may need to be sanded down in the stem area to fit into the main piece.  Alternatively it can be scaled down in your slicer if needed.

Installation:

Rails require 4x 4-40 3/8” screws (Captain slug sized)

Note the attached picture.  Blaster must be opened to remove the grey part (or just cut the screw posts)