Card frame for standard collectible card (M:tG, Pokemon, etc)

A simple card frame designed to hold a sleeved card with light tension. There is space in the top for a pushpin, in order to hang the frame on a wall.

Cards are easily inserted and removed, and the frame is intended not to bend or pinch your card.

Calibrated to fit a Dragon Shield.

Print instructions

There are overhangs on the internal flares, so I recommend printing with some support.

There are some fine details in the gilding so if your printer can handle lower layer heights than 0.1mm it may look nicer, but it looks fine at 0.1mm.