Flash Drive Holder - Modular +++

[Additional model files added Feb. 10, 2020]
[Additional file added for microSD card module Apr. 30, 2020]

This is for holding flash drives and SD cards and whatever. I believe this has some advantages over other designs:

• holds odd shaped flash drives
• drives easily removed or added
• expands to be as large as you need it - just add more modules
• customize to your needs with different types of modules

In the cover photo you can see some of the options: Back row raised by using half-height modules under full height modules; variety of drive styles easily accommodated, four different modules in use.

About the file names:

The file names relate to the "basic module" which is 0.640"W x 1"D x 1"H. Therefore

Module_T5_1x1... is a basic module
ModuleT5.5x1... is a basic module but 0.5" high
ModuleT5.5x2... is a 0.5" high double width
. . . and so on.

Additional module sizes are easily made using the 3D CAD files.

OnShape 3D CAD files available here:

https://cad.onshape.com/documents/745423b0055e90ae30c803ee/w/418dde8530fd3dbaed6a2b97/e/6410017f1350da881e6ab00d

Print instructions

Printed in PLA on MK3/S

For best results:
0.20mm Quality
0% fill density