1/4" hex bit holder. Double-sided. Magnetic.(Customizer)

This model inspired by Magnetic Bit Holder - Parametrized by Nudel_P.

I made it double-side and add customized inscription.

Customizable options:

• Number of slots on one side.
• Inscription.

Instructions

You need:

• 3 x printed part
• n x magnets d=8 h=1 (n - number of bits on one side)
• 2 x M3x20 screws
• 2 x M3 nuts

The 8mm megnets still available at DX.COM: Super-Strong Rare-Earth RE Magnets (8mm 20-Pack)

Building instructions:

• Place the magnets in the middle part.
• Insert the nuts into the slots temporarily using a wide washer (M3, DIN9021) and M3x20 screw. Then remove screws and washers
• Turn the middle part according to the inscription.
• Assemble the holder using screws M3x20.

P.S. English is not my native language. Text corrections are welcome.