Plant Pot Risers

These plant pot risers are designed to keep pots off of the ground to promote better circulation around the drainage holes. The intended use is for cactuses and succulents, but these can be useful for any type of potted plants, especially those that require drier conditions. At least three risers are required, but more can be used for extra support or to accommodate less common shapes such as elongated planter pots.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Infill:

10%

Filament:

Notes:

I printed these on a glass bed which can cause elephant's foot on many prints. I used the "Initial Layer Horizontal Expansion" setting in Cura to reduce the elephants foot effect. This allows the risers to have a larger contact area with the ground and provide more stable support to my plant pots.

the risers in action