150mm lithophane box

This is a single lithophane box litho will need to be 150 x 150 x 3 mm box itself is 230 x230 so will take a good size printer to make it.

magnets used 3 mm x 8 mm 8 used in this build

I used dremel with grinding stone to cut a hole for magnet in battery lid and super glued all magnets in.

5v battery powered LED strip cut to fit and soldered together.

I used silver tape to maximize light reflection in hopes to use fewer LEDs and maximize battery life

Supports only needed for battery area

any question feel free to ask i will respond as soon as I can.

Print Settings

Printer Brand:

Creality

Printer:

CR-10

Rafts:

No

Supports:

Yes

Resolution:

0.16 0.20 0.24

Infill:

20%

Filament: 3d solutech pla silver meatal