Raspberry Pi HDMI Camera Adapter Case V2

This is an update to https://www.printables.com/model/199730 - step files are included there if'n you want to make any changes of your own. 

I designed this case to accomodate a raspberry pi 4b and the HDMI camera adapter by Petit Studio (https://www.tindie.com/products/freto/pi-camera-hdmi-cable-extension/), and a 30mm fan. Case has a cutout for the SD card for ease of access.

I reused the screws that came with my old raspi case to hold the board down, and some random tiny screws to hold the hdmi adapter to the inside of the lid. Screw holes might need a slight tickle with a drill depending on your printer tolerances. Fan is fastened by M3 x 15mm bolts and nuts.

In V2, I got slightly less lazy and added hinges to accomodate M3 bolt/nut (or a 3mm pin, or print your own pin if you're feeling swirly). I also added 4040 extrusion gubbins to the sleeves that hold the case together. In my pics you'll see I mounted it on the left hand side of my ender 3, I had to drop the motherboard bracket down and slide in from the front. 

I've added the plain sleeves here as well so choose your own adventure there. A, B or C - the choice is yours.

Check out my Pi Cam V2 case that houses the other end of the HDMI adapter kit as well - https://www.printables.com/model/199731