E-Stop Button Enclosure

This is a simple box for a standard industrial E-Stop switch. It has a hole in the top for the switch and a hole in the back for a standard PG9 cable gland.

The bottom attaches with four M3 flat head screws. The holes actually have modeled threads, but most 3D printers will require running a tap through the holes after printing.

Print Settings

Printer:

MakerFarm i3v

Rafts:

No

Supports:

No

Resolution:

0.25mm

Infill:

20

Filament:

Orange

Notes:

Both parts can be printed with minimal or no support.