MH Build PETG. Works great.
Don't slice with external perimeters first without support or the inner curve on filament guide will likely fail to attach properly.
Prusa i3 MK Filament Guide ClipOn
The Prusa i3 kit comes without a filament guide - this is a problem when using stiffer filaments on small spools.
467
4718
88
16 k
updated January 22, 2023
Makes
Comments
@asphaltbuffet Looks great! Thank you for the Feedback!
perfect!
@Mac10_2134654 Thank you for the Feedback!
Gedruckt mit PETG "das Filament".
Ich werde jedoch noch die Version mit dem kleinen Loch drucken da das Filament im Spalt hängen bleibt.
@fstrauss_1998926 Thank you for the Feedback!
@ZzyzxFox_1277918 Looks good! Thank you for the Feedback!
Printed in PETG. Fits the frame quite nicely. Went with the large loop version and the filament works through without any issue.
@Vic_1391877 Thank you for the Feedback!
@ShizoruSaito Thank you for the Feedback!
Works great! Printed mine at 0.2 mm with 99% scaling for the Prusa MK3S and it snaps on very tightly. Matches well in Prusa PETG Jet Black.
@Metalbird_123277 Thank you for the Feedback!
@scribblesm_476942 Thank you for the Feedback!
Really like the modular design so I can add my own attachments for ptfe tubing
@DiTechFab Thank you for the Feedback!
@hitjim Thank you for the Feedback!
@MichaelC_869595 Creative use... Thank you for the Feedback!