Backpack camera attachment system

This is a system for attaching a camera to a backpack.
This system can use your existing 41x41mm chamfered camera plate.

You need:

• 41x41mm metal camera plate (Or you can use the one included in this project)
• 2 M4x25 screws
• 2 M4 hex nuts
• 2 M4x9 washers

Extra information:

• Print two knobs, these are used to screw on top of the screws. Their purpose is to protect your arms from hitting the screws
• make sure the strap attach uses an infill which is strong in both axis since the most stress is on this part. Preferably triangle infill.
• For heavy camera's it is best to use a backpack with a sternum strap.