Protective case for Arduino Nano

I made this simple case for my Arduino nano to protect it from potential short circuits and sharp edges. This case…
11
92
2
659
updated February 19, 2023

Description

PDF

UPDATE 20230219: Since I managed to hack a USB C port onto my Nano, I made an updated version of this case, I also added slots so I can add 4 lock nuts to absolutely lock the case up.(I know its overkill but overkill is always fun :p) The new version requires M3*12mm bolts instead.

*************************************************************************

I made this simple case for my Arduino nano to protect it from potential short circuits and sharp edges.

This case only fits those who choose to solder the pins upward, like displayed in the picture!!

While maintaining the access to all the pins, labels, leds and switches, this case makes it a bit easier to handle the nano (as it is now a block shape) and it also leaves the space for the USB connectors.

All the pins are slightly lower than the case top so no more sharp pins sticking out.

You will need four M3*10 hex socket bolts to assemble this case.

Print Settings

Supports:

Yes

Resolution: 

0.2 is enough

Infill:

100

 

Category: Electronics

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License