Mini Lathe Change Gears Tray, Lie-Flat

Flat trays for mini lathe change gears, for those with shallow drawers in your toolchest.  This design holds the plastic gear set that came with my Harbor Freight 7x10 lathe.  The individual trays are sized to be printable on a MK3S bed.  

I opted against putting raised lettering on the tops to prevent the stack from being wobbly.  The gears normally have embossed tooth count; if that's insufficient for your eyeballs then a Brother type label maker will give high contrast marking with minimal thickness.

The gear sets can vary between lathe models and generations; you may need to remix if yours are different.

The CAD for this is here in OnShape: https://cad.onshape.com/documents/36ba39e45d5a9c9f0bc04f11/w/9ef75410fcd54456185a222f/e/bdda3e66befcc4e8f7731367

Material:  PETG

Nozzle: 0.4

Layer Height: 0.25/0.20

Infill: 15% honeycomb