Headphone stand

Headphone stand with 21 cm height. Originally designed for Beats Solo 3 headphones, but obviously will work for any.

The pole is designed to use M3 threaded inserts and M3 screws. For the screws, any length between 7 and 17 mm will work since there is enough space inside the pole to allocate them.

On the pole, I used brim to reduce risk of detattachment while printing.

Once assembled the structure is really robust and sturdy.

GCode is generated for PLA and 0.2 mm layer height. Model files are also attached in case these parameters don't fit your needs.