Logitech Z333 speaker wall mounted shelf

I felt like I needed more room on my desk and figured I could make wall mounts for my Logitech Z333 speakers on the desk. The shelves came out great! You can use these shelves to hold other items as well. I added a picture of one holding a plant for reference.

Print settings

I printed my shelves using Overture red PLA. You should be able to print it using your very own PLA settings. However, I would recommend a raft as it is a 5 to 10 hour print depending on your infill and other settings. 
 

My settings

• 0.4mm nozzle
• layer height 0.2mm
• first layer height 0.25mm
• (optional, depending on your bridging potential, you may not need this) supports
• (optional) outer Brim/Raft at 5mm 

Enjoy and do not hesitate to let me know what I can do different!