Dacia Duster 2 Phone Mount

I printed the brodit style mount from the Nibirul thing but I found that if I applied a even a little pressure it popped off the dash.

I remedied it by copying the design from scratch in Tinkercad then adding an cross brace that is inserted after the holder is in place. That way it cannot come off the dash at all, it is super secure.

Print instructions

Category: 3D Printing Print Settings

Printer Brand: Monoprice

Printer: Select Mini

Rafts: No

Supports: No

Resolution: .218

Infill: 50% on the holder 100% on the brace.

Filament: Sunlu PLA+
Notes:

The brace is a snug fit but that is intentional so it does not fall out.

I stuck a magnet holder on the front of mine and it works great.

This is will probably need printing in PETG.