{"data":{"model":{"id":"197028","slug":"snap-in-sd-card-extender-for-firmware-updates-on-t","name":"Snap-In SD card extender for firmware updates on Tenlog/HICtop D3 Hero IDEX","authorship":"author","club":false,"excludeCommercialUsage":false,"price":null,"eduProject":null,"ratingAvg":"0E-10","myRating":null,"ratingCount":0,"description":"\n\n\n

When you update the firmware, you have to pull everything apart. I made this little snap in place holder that allows you to access the port through a cooling vent on the right-front.

Allows you to use a common microSD to SD card adapter so you can flash screen firmware without opening case. You can buy an adapter - I used a 48cm unit from LANMU, and split the original case off with my fingernail.

Print Settings

Rafts:

Supports: \n

Resolution:

0.2

Notes:

There are break-away supports at the front edge and on the central tabs. Shown in red on the CAD photo. They pull away with bare fingers easily enough.

\nIn case it isn't obvious: Print this upside down from how it loads in.\n

Post-Printing

Put it in: without adapter, rotate the high peg in first, then the one closest to it, slide it down, and flex slightly to get the last peg in. Then push the board in place. It's a little fiddly, but once it snaps it, it's good!

Be sure to loosen screw on the corner of the screen to allow adapter to plug in easily. You can re-tighten afterwards.

BE CAREFUL not to tear the cable, keep it flat to the board. I put a ziptie over it.

Let me know if it works for you!

\n\nCategory: 3D Printer Parts\n","category":{"id":"135","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","description":"Upgrading and improving your 3D printer couldn't be easier - no matter whether you're looking for functional or aesthetic modifications. Discover the best improvements.","__typename":"CategoryType"},{"id":"135","name":"Creality Parts & Upgrades","nameEn":"Creality Parts & Upgrades","description":"Free parts and upgrades for your Creality 3D printer!","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2022-05-06T17:28:01.074988+00:00","firstPublish":"2022-05-06T17:28:42.343537+00:00","datePublished":"2022-05-06T17:28:42.343537+00:00","dateCreatedThingiverse":"2020-05-22T18:25:39+00:00","nsfw":false,"summary":"When you update the firmware, you have to pull everything apart. I made this little snap in place holder that allows\u2026","likesCount":1,"makesCount":0,"liked":null,"printDuration":null,"numPieces":0,"weight":null,"nozzleDiameters":null,"usedMaterial":null,"layerHeights":null,"mmu":false,"materials":[],"dateFeatured":null,"downloadCount":17,"displayCount":250,"filesCount":1,"privateCollectionsCount":1,"publicCollectionsCount":1,"pdfFilePath":"media/prints/197028/pdfs/197028-snap-in-sd-card-extender-for-firmware-updates-on-tenloghictop-d3-hero-idex-f0240db0-3326-47a5-bb4f-4e5b44a7a94f.pdf","commentCount":0,"userGcodeCount":0,"remixCount":0,"canBeRated":false,"printer":null,"image":{"id":"903209","filePath":"media/prints/197028/images/1822351_f2b655a4-fa37-4e1a-bbda-2b67f104d5be/large_display_2020-05-22_10_54_04-autodesk_fusion.png","rotation":0,"imageHash":"9vcJBoDVh3h5dXifdYeXWZiHnXeve/g=","imageWidth":1024,"imageHeight":817,"__typename":"PrintImageType"},"images":[{"id":"903209","filePath":"media/prints/197028/images/1822351_f2b655a4-fa37-4e1a-bbda-2b67f104d5be/large_display_2020-05-22_10_54_04-autodesk_fusion.png","rotation":0,"imageHash":"9vcJBoDVh3h5dXifdYeXWZiHnXeve/g=","imageWidth":1024,"imageHeight":817,"__typename":"PrintImageType"},{"id":"903210","filePath":"media/prints/197028/images/1822352_c8e20130-2531-4744-9ba0-ba70276a99e6/large_display_img_20200521_224804_197028.jpg","rotation":0,"imageHash":"FwgKDYKNVEmQqIVHeGiGh3KgDQrL","imageWidth":1024,"imageHeight":768,"__typename":"PrintImageType"},{"id":"903211","filePath":"media/prints/197028/images/1822353_235202d2-3543-4dbb-a102-3d29d4634edf/large_display_hictop_display_flashing_extender_v8.png","rotation":0,"imageHash":"Z+cJHYSmmIiPhneLd1eHd7eGf2r3","imageWidth":800,"imageHeight":600,"__typename":"PrintImageType"}],"tags":[{"name":"sdcard","id":"3091","__typename":"TagType"},{"name":"thingiverse","id":"6174","__typename":"TagType"},{"name":"hictop","id":"8674","__typename":"TagType"},{"name":"tenlog","id":"15158","__typename":"TagType"},{"name":"tenlogd3pro","id":"15159","__typename":"TagType"},{"name":"firmware","id":"16002","__typename":"TagType"},{"name":"d3hero","id":"84053","__typename":"TagType"}],"thingiverseLink":"https://www.thingiverse.com/thing:4386246","filesType":null,"previewFile":{"id":"821905","filePreviewPath":"media/prints/197028/stls/1822354_e430f023-337d-4585-ba78-6fcf934fc02c/hictop_display_flashing_extender_v8_preview.png","__typename":"STLType"},"license":{"id":"1","disallowRemixing":false,"__typename":"LicenseType"},"remixParents":[{"id":"155098","modelId":null,"modelName":null,"modelAuthor":null,"model":null,"url":"https://www.thingiverse.com/thing:4386246","urlAuthor":"AbeFM","urlImage":"https://cdn.thingiverse.com/assets/2d/97/3f/b9/1e/featured_preview_2020-05-22_10_54_04-Autodesk_Fusion_360_Education_License.png","urlTitle":"Snap-In SD card extender for firmware updates on Tenlog/HICtop D3 Hero IDEX","urlLicense":null,"urlLicenseText":null,"__typename":"PrintRemixType"}],"remixDescription":null,"__typename":"PrintType","user":{"id":"30657","handle":"AbeFM","verified":false,"dateVerified":null,"publicUsername":"AbeFM","avatarFilePath":"media/auth/avatars/af/af112e56-2a5e-44f7-bcb8-a585284007c4.jpg","badgesProfileLevel":{"profileLevel":14,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isFollowedByMe":false,"isHiddenForMe":false,"canBeFollowed":true,"billingAccountType":"personal","lowestTierPrice":null,"highlightedModels":{"models":[{"id":"197047","name":"Dragon Head Glasses Stand without loops","slug":"dragon-head-glasses-stand-without-loops","ratingAvg":"0E-10","likesCount":19,"liked":null,"datePublished":"2022-05-06T17:28:26.343537+00:00","dateFeatured":null,"firstPublish":"2022-05-06T17:28:26.343537+00:00","downloadCount":72,"mmu":false,"category":{"id":"42","path":[{"id":"17","name":"Fashion","nameEn":"Fashion","__typename":"CategoryType"},{"id":"42","name":"Other Fashion Accessories","nameEn":"Other Fashion Accessories","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2022-05-06T17:28:00.800737+00:00","image":{"id":"903355","filePath":"media/prints/197047/images/1822523_78008876-8412-45c2-859c-299337263c94/94f60422df3f9a95626b155ee7cbd241_display_large_19.jpg","rotation":0,"imageHash":"bfkJLgLcuKZ5dvhnd3iHeXeHVHtw34k=","imageWidth":895,"imageHeight":1024,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"30657","handle":"AbeFM","verified":false,"dateVerified":null,"publicUsername":"AbeFM","avatarFilePath":"media/auth/avatars/af/af112e56-2a5e-44f7-bcb8-a585284007c4.jpg","badgesProfileLevel":{"profileLevel":14,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"197053","name":"90* Under Counter Bowden PTFE guide for Filament Spools","slug":"90-under-counter-bowden-ptfe-guide-for-filament-sp","ratingAvg":"0E-10","likesCount":17,"liked":null,"datePublished":"2022-05-06T17:28:20.343537+00:00","dateFeatured":null,"firstPublish":"2022-05-06T17:28:20.343537+00:00","downloadCount":78,"mmu":false,"category":{"id":"40","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"40","name":"Accessories","nameEn":"Accessories","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2022-05-06T17:28:00.702335+00:00","image":{"id":"903399","filePath":"media/prints/197053/images/1822583_087e9296-78e4-4499-a81a-594069f8aa9f/c6aebe3da141b476a5e9ba3786a50645_display_large_19.jpg","rotation":0,"imageHash":"3jgKFYj4pXhQe4ioddhmp39L9OaK","imageWidth":1024,"imageHeight":768,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"30657","handle":"AbeFM","verified":false,"dateVerified":null,"publicUsername":"AbeFM","avatarFilePath":"media/auth/avatars/af/af112e56-2a5e-44f7-bcb8-a585284007c4.jpg","badgesProfileLevel":{"profileLevel":14,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"197061","name":"MMU Muti-Material Test Flower","slug":"mmu-muti-material-test-flower","ratingAvg":"5.0000000000","likesCount":15,"liked":null,"datePublished":"2022-05-06T17:28:12.343537+00:00","dateFeatured":null,"firstPublish":"2022-05-06T17:28:12.343537+00:00","downloadCount":396,"mmu":false,"category":{"id":"12","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"12","name":"Test Models","nameEn":"Test Models","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2022-05-06T17:28:00.550359+00:00","image":{"id":"903441","filePath":"media/prints/197061/images/1822644_5a46165b-221c-4a7c-bb46-0f7e39b6b0d5/8d56140c4dc1e04b5fc2c1e762114ad6_display_large_19.jpg","rotation":0,"imageHash":"5hgGJ4r+golliYdMh4d4uFl5qCQFCYUI","imageWidth":728,"imageHeight":682,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"30657","handle":"AbeFM","verified":false,"dateVerified":null,"publicUsername":"AbeFM","avatarFilePath":"media/auth/avatars/af/af112e56-2a5e-44f7-bcb8-a585284007c4.jpg","badgesProfileLevel":{"profileLevel":14,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"197070","name":"Extruder eSteps Calibrator Stick","slug":"extruder-esteps-calibrator-stick","ratingAvg":"0E-10","likesCount":15,"liked":null,"datePublished":"2022-05-06T17:28:04.343537+00:00","dateFeatured":null,"firstPublish":"2022-05-06T17:28:04.343537+00:00","downloadCount":74,"mmu":false,"category":{"id":"12","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"12","name":"Test Models","nameEn":"Test Models","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2022-05-06T17:28:00.402263+00:00","image":{"id":"903493","filePath":"media/prints/197070/images/1822734_fa4d0b26-b6b1-41b6-adcb-069fdb2ca84e/0b406ba1852e4b6fef0c3d8c8ed2c2fe_display_large_19.jpg","rotation":0,"imageHash":"aAgGBYCHd3d/d3eCh4iJemeAWAbI","imageWidth":1024,"imageHeight":768,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"30657","handle":"AbeFM","verified":false,"dateVerified":null,"publicUsername":"AbeFM","avatarFilePath":"media/auth/avatars/af/af112e56-2a5e-44f7-bcb8-a585284007c4.jpg","badgesProfileLevel":{"profileLevel":14,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"197029","name":"MMU Filament Buffer from MMU2S parts.","slug":"mmu-filament-buffer-from-mmu2s-parts","ratingAvg":"0E-10","likesCount":13,"liked":null,"datePublished":"2022-05-06T17:28:41.343537+00:00","dateFeatured":null,"firstPublish":"2022-05-06T17:28:41.343537+00:00","downloadCount":53,"mmu":false,"category":{"id":"40","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"40","name":"Accessories","nameEn":"Accessories","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2022-05-06T17:28:01.061247+00:00","image":{"id":"903212","filePath":"media/prints/197029/images/1822355_d42a8edb-ae22-4a4b-9401-d299dc8c482b/large_display_img_20200324_115209_197029.jpg","rotation":0,"imageHash":"GAgODYK7h5d+l5efeHd2d7BLC7ql","imageWidth":1024,"imageHeight":768,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"30657","handle":"AbeFM","verified":false,"dateVerified":null,"publicUsername":"AbeFM","avatarFilePath":"media/auth/avatars/af/af112e56-2a5e-44f7-bcb8-a585284007c4.jpg","badgesProfileLevel":{"profileLevel":14,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"297584","name":"Ball Jar Fruit Fly trap","slug":"ball-jar-fruit-fly-trap","ratingAvg":"5.0000000000","likesCount":12,"liked":null,"datePublished":"2022-10-17T19:51:48.178370+00:00","dateFeatured":null,"firstPublish":"2022-10-17T19:51:48.176319+00:00","downloadCount":71,"mmu":false,"category":{"id":"45","path":[{"id":"3","name":"Household","nameEn":"Household","__typename":"CategoryType"},{"id":"45","name":"Other House Equipment","nameEn":"Other House Equipment","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2022-10-17T19:51:48.196337+00:00","image":{"id":"1275173","filePath":"media/prints/297584/images/2606328_493d5e4f-0a3d-4fc5-b683-e804b5520421/20221017_124859.jpg","rotation":0,"imageHash":"mhgOFYJ7SJcwiIdxeHqZjPViNw5m","imageWidth":1942,"imageHeight":1456,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"30657","handle":"AbeFM","verified":false,"dateVerified":null,"publicUsername":"AbeFM","avatarFilePath":"media/auth/avatars/af/af112e56-2a5e-44f7-bcb8-a585284007c4.jpg","badgesProfileLevel":{"profileLevel":14,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"197019","name":"HF Cord Reel Wind Assistant","slug":"hf-cord-reel-wind-assistant","ratingAvg":"0E-10","likesCount":12,"liked":null,"datePublished":"2022-05-06T17:28:50.343537+00:00","dateFeatured":null,"firstPublish":"2022-05-06T17:28:50.343537+00:00","downloadCount":20,"mmu":false,"category":{"id":"53","path":[{"id":"3","name":"Household","nameEn":"Household","__typename":"CategoryType"},{"id":"53","name":"Outdoor & Garden","nameEn":"Outdoor & Garden","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2022-05-06T17:28:01.214903+00:00","image":{"id":"903158","filePath":"media/prints/197019/images/1822286_63c335c4-8530-453f-97a6-8ca0fa857d16/large_display_img_20200828_103923_197019.jpg","rotation":0,"imageHash":"XEkKLYbGpKaQh4eOdnWXZ1BZBvNk","imageWidth":1024,"imageHeight":760,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"30657","handle":"AbeFM","verified":false,"dateVerified":null,"publicUsername":"AbeFM","avatarFilePath":"media/auth/avatars/af/af112e56-2a5e-44f7-bcb8-a585284007c4.jpg","badgesProfileLevel":{"profileLevel":14,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"197027","name":"Vase Mode \"beer\" Slug Trap","slug":"vase-mode-beer-slug-trap","ratingAvg":"5.0000000000","likesCount":10,"liked":null,"datePublished":"2022-05-06T17:28:43.343537+00:00","dateFeatured":null,"firstPublish":"2022-05-06T17:28:43.343537+00:00","downloadCount":76,"mmu":false,"category":{"id":"53","path":[{"id":"3","name":"Household","nameEn":"Household","__typename":"CategoryType"},{"id":"53","name":"Outdoor & Garden","nameEn":"Outdoor & Garden","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2022-05-06T17:28:01.090630+00:00","image":{"id":"903207","filePath":"media/prints/197027/images/1822348_119ae6b6-c201-43fa-8689-4bc690b1e1dc/large_display_img_20200518_142002_197027.jpg","rotation":0,"imageHash":"mhgKDYIKlIiFiHdxm5d4ePV8/G3t","imageWidth":1024,"imageHeight":768,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"30657","handle":"AbeFM","verified":false,"dateVerified":null,"publicUsername":"AbeFM","avatarFilePath":"media/auth/avatars/af/af112e56-2a5e-44f7-bcb8-a585284007c4.jpg","badgesProfileLevel":{"profileLevel":14,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"}],"featured":false,"__typename":"HighlightedModelsType"},"designer":false,"stripeAccountActive":null,"membership":null},"contests":[],"contestsResults":[],"prusameterPoints":null,"latestContestResult":null}}}

Snap-In SD card extender for firmware updates on Tenlog/HICtop D3 Hero IDEX

Makes Add make

Comments

Makes