Simple holder for a Schrader (standard car tire valve) inflator that has a length of 1/4" pipe. Won't work if you have the quick disconnect directly attached to the inflator head.
Printer:
Prusa MK3S
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
20%
Filament:
eSun PLAwhite
Notes:
Doesn't need supports, but you might want to add a brim if you have first layer adhesion issues as the part in contact with the print bed is on the smaller side.
Category: Tool Holders & BoxesThe author marked this model as their own original creation. Imported from Thingiverse.