Yet Another Filament Dry Box and Shelf using Ikea Samla

Because there are not enough of these around in the world:
Here's yet another filament dry box based on Ikea's Samla

Print instructions

Category: 3D Printer Accessories Print Settings

Rafts: No

Supports: No

Resolution: 0.15

Infill: 30% Honeycomb

Filament: 3D FREUNDE PLA Post-Printing

Well...basically everything is just screwed..erm...I mean...u know what I mean :-)

Except the supports for the PVC tube: they're glued to the boxes with hot glue.