Designed based on measurements from a WAGO 280 terminal block.
To edit length of the rail clip, open the file in F360 and edit sketch one of the base clip.
Change the number circled in the pic. Both sides will adjust and remain centered on the centerline of the DIN rail. Edit the circled numbers in the circuit board holder sketch to fit your PCB
Printing:
Works with PETG and PLA. Designed for 0.4mm or 0.6mm walls, top/bottom optional unless you use the din mount with side wall for gluing.
Category: ElectronicsThe author marked this model as their own original creation. Imported from Thingiverse.