Blue Microphones Yeti Shock Mount

This is a shock mount I designed for my Blue Yeti microphone. It requires 1/8" bungee cord for assembly, approximately 1-2M if you want to be safe. Using dabs of hot glue when assembling the arms to the clamps would help with assembly.

NO EXTRA HARDWARE IS REQUIRED. The thumbscrews that are included with the Blue Yeti can be used to mount the clamps to the microphone body, as designed. You don't need to purchase hardware, just bungee cord.

A mic adapter can be taken off of most mic holders (check model for exact tab width to be sure it'll fit) if not, those mic holders usually come with boom arms from Amazon. Super easy to get ahold of, especially if you need a boom arm as well.

Print Settings

Printer:

Maker Select Mini V1

Rafts:

Yes

Supports:

No

Resolution:

0.1mm

Infill:

80-100