Reverse Temperature Tower

This needs to be set in the G-Gode to COOL DOWN 5 degrees at each state.

From 235 to 200 degrees

A pause may also be needed to allow the hot end to cool

M109 R Wait for Hot End Temperature, Note R instead of S to wait for cool down

There is a 1mm inside thickness to the base that needs to be added to layer Temperature heights

The sections after the 1mm base height Temperature distance changes are at 10 mm

Customized version of http://www.thingiverse.com/thing:2621752

Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=2621752

Instructions

Using the following options:

fn_override = 0

FontFace = 2

BlockSize = [10,10,10]

Labels = [215,220,225,230,235,240]

NumberOfBlocks = 6

TopOfTriangleThickness = 2

WallThickness = 1.2

DoYouUnderstandYouMustModifyTheGCodeThisMakes = 7

TowerBase = [20,20,1]

FontDepth = 0.5

ReverseLabelOrder = 1

Category: 3D Printing Tests