Customizable Dice

Customizable Dice for quick and easy creation of a dice of your own design.

Adjustable Parameters Include :

Dice size

Wall thickness

Load size

Loaded number

Character type

duel material split

and more...

Not a Designer? or simply never used OpenScad before?

Not a problem!

I've designed this scad file so as to make it quick and easy forANYONE to create their own a custom dice. You don’t need to be familiar with OpenSCAD or programming to use it. Just change the values of a few, well labelled, parameters.

If you’re not already familiar with OpenScad check out the video link below, it will give u a very quick overview of the user interface, which is all you need to know for this project. (you might want to jump the first 1:30 min)

www.youtube.com/watch?v=dx06_gcdMck

I would strongly recommend Downloading OpenSCAD rather than trying to using the in-site editor "Customizer" which seems to be plagued with bugs.

OpenSCAD is fee to Download and under 14 MB in size.

Printing Instructions :

I recommend setting you print to 100% infill, especially if your creating a loaded dice as this is what gives the loaded side its weight.

As always, pleas do share a photo of any makes.

Thanks

Print Settings

Printer Brand:

Ultimaker

Printer:

Ultimaker 2

Rafts:

No

Supports:

No

Resolution:

0.4 nozzle __ 0.1 mm layer thickness

Infill:

100%

Notes:

Except for the load volume the dice is hollow, therefore I recommend you set you print to 100% infill as this is what gives the loaded side of the dice its weight.