Carvey CNC Vise

This vise fits into any Carvey CNC machine and is utilized to engrave small materials where you can't use the traditional clamps that are provided with the Carvey. All nuts and bolts work best with M10 steel hardware that you can pick up at most hardware stores, but feel free to use the 3d printed hardware models. You will need to epoxy or plastic weld the all thread bolt to the plastic knob.

You will also need to "trick" the Carvey's smart clamp with something that has the same Z thickness as the material in the vise, plus the thickness of the vise. We are working on a model for that, but several small blocks and shims could achieve this.

Print Settings

Printer Brand:

LulzBot

Printer:

TAZ 5

Rafts:

No

Supports:

Yes

Resolution:

.28mm

Infill:

20%

Notes:

Print with 1.5mm shell.

Modeled in MoI 3d and rendered in Cheetah 3d.