GT2560 Rev A+ and Raspberry Pi Control Box

Made two versions of a control box for my P3Steel.

Both are made for Geeetech GT2560 Rev a+ (possible fit others as well?)

Rev 2 is made for Raspberr Pi Zero, also with space for an DC-DC converter.

Attached is also a cover with cutouts for 2 x 40mm fans

Rev 3 is made for Raspberr Pi 2/3/3B.

Attached is also a cover with cutouts for 1 x 92mm fan

Both are made with knurled inserts as a thought.

These will be melted in place with an soldering iron.

But nuts and long bolts would work as well.

Knurled inserts https://www.aliexpress.com/item/500Pcs-set-Insert-Embedment-Nuts-Injection-Molding-Nut-Brass-Insert-Knurled-Nuts-Knurling-Tool-Embedded-Parts/32877279906.html?spm=a2g0s.9042311.0.0.27424c4dnZKtB9

Print Settings

Printer Brand:

Prusa

Printer:

Prusa Steel

Rafts:

No

Supports:

No

Resolution:

0.4

Infill:

15%

Filament: Generic PLA Any Any

Notes:

As this is a quite large print (almost all my print surface), a brim is recommended.
Print first layer at slow speed to achieve a nice first layer.