Theater Chair Swivel Table - 83.5mm Cupholder with Dual Bearing

*This is still a work in progress*

A modified version of NailDRV swivel table for a theatre chair. The mount fits in the cup holder hole.The bearing was inspired by the one by SavageRodent: https://www.thingiverse.com/thing:857359. However this version is for a Costco Chair.

Uses the same 6mm ball bearings (X11), a M6 X 60mm Bolt and M6 Nyloc nut.

This version is for a cupholder with a 83.5mm diameter and have a top and bottom thrust bearing.

The wood board is a few bits of scrap I laminated together and I used a CNC to Vcarve inlay the lettering.

Print Settings

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

20

Filament: Generic PLA Black

Notes:

This model should be printed at 0.2mm as there are sacrificial bridges of that thickness.

No supports required. Print with the bear bearing races facing up.

2X Seat_SwivelTable-_Bottom_Bearing_Holder Required.

Test Fit STL just to check the fit before printing the larger print.

Category: Household