A GoPro Attachment for Bike with Quick change for adjustable tripod.
Use a Spring if you like (as shown in picture) to fast adjustment to ground. Tighten the screw with spring before placing the tripod with GoPro on the ground. The spring is for loosely holding the leg in place before adjusting it to the ground. Press together first and second plate white the spring is not fully tightens to automatically adjust all the the legs to the ground simultaneously.
You also need 5mm screw 25mm long with Hexhead for the screwHandle.
Use a 5 mm thread-rod to bruch up the threaded holes. use a 5mm drill to bruch up the 5mm holes after printing.
NB: The spring is not needed to make the tripod to work.
All my GoPro related Things:
GoPro Bike and tripod atachment with quick coupling https://www.thingiverse.com/thing:4570589
Phone stand with screw and GoPro atachment https://www.thingiverse.com/thing:4328023
Phone Atachment to Bike with spring damper https://www.thingiverse.com/thing:4458076
Heavy GoPro Base Stand https://www.thingiverse.com/thing:4693687
Light GoPro Base Stand https://www.thingiverse.com/thing:4696458
DSLR camera Stand with GoPro atatchment https://www.thingiverse.com/thing:4424068
GoPro Attachment system https://www.thingiverse.com/thing:4696725
Ring Light https://www.thingiverse.com/thing:4696747
Sefie stick. Long. Vasemode. https://www.thingiverse.com/thing:4678212
GoPro 360 coupling https://www.thingiverse.com/thing:4697342
Category: CameraThe author marked this model as their own original creation. Imported from Thingiverse.