MicroSD Card Mount for CR-10 Control Box

I upgraded my CR-10 with a BTT SKR 1.4 Turbo mainboard and designed a mount for a LANMU microSD extension cable I found on Amazon so that the microSD cable would fit into the slot already cut into the CR-10 control box where the stock mainboard fit (https://www.amazon.com/gp/product/B085H8ZRW1).

I used a few M3 bolts to align it and then hot-glued it in place. While this might work for other MicroSD extension cables, I have included a link to the one that I used. I did pry off the plastic cover around my microSD cable so that I could slide the microSD card reader in nicely from the side and it would hold it in place.

I have included STP & IPT files for modification.