Not just a table. A rack! A Shelf!

Print your part at home, some wood dowels from the local hardware store. 

Boom! A side table, A self or A cloth rack. 

• No support is needed!
• Minim contact to the print bed, super easy to remove from the bed. 
• Optimize for 3d printing, strong and fast. 5hrs for a piece only! (1mm nozzle .32mm layer 50mm/s 2lys wall-10%infill)

Enjoy printing and have fun.

Material I used/need:

• For the table
  • Universal piece x7 
  • 1-¼ inch wood dowel x1 (20in or  length by your choice)
  • #6 wood screws ¾ inch x28
• For the cloth rack
  • Universal piece x3
  • 1-inch wood dowel x4 (48inch)
  • 1-inch wood dowel connector x3
  • #6 wood screws ¾ inch x12
• For the wall Shelf
  • Universal piece x2
  • Wood panel 8-½ x 16x3/4 x1(Or wood panel by your choice)
  • #6 wood screws ¾ inch x4
  • Drywall expansion screw x4

Enjoy printing and have fun.