Hoop Booster

After finishing your print you need to press-fit metal hoop tightener into this part.

It is necessary to heat the inner cavity of the printed handle with an air gun with a thin tip on it and then insert the metal hoop tensioner into the holder cavity with good amount of force. Do not heat the metal handle of the hoop - this can damage the parts of the hoop. Heat only the printed part.

Please give a feedback if it works for you.

Print Settings

Printer Brand:

Prusa

Printer:

Prusa Clone

Supports:

No

Resolution:

0.15

Infill:

100%

Filament:

White

Notes:

Printed in vertical orientation.