KTM 390 Adventure Fork Adjuster Dial Cap

I designed this cover to prevent random people walking around my bike from changing my suspension settings. Yes, I'm that paranoid.

As an added bonus, it makes the bike look nice, stealthy if you will.

It's a friction fit part that attaches onto the large hexagon on top of each leg. Feel free to scale the model slightly to adjust for your printer's tolerances. It should fit very tight.

I used 0.6mm nozzle, 0.3mm layer height, 2 perimeters, 4 top and bottom layers, 10% triangle infill, ABS plastic, 240C nozzle temp and 80C bed temp. Printed upside down.

The part may benefit from using TPU instead of ABS, but I have no TPU at hand right now to confirm that, I may add more information about that later.

Fits 2022 KTM 390 Adventure. May fit older models (please leave a comment if you try it).