4 servo walking robot base controled by servo tester

I wanted to make a Old school type robot with the glide slide walk action using 4 servos and a servo tester as the manual and automatic controller. The servo testers are so cheep, under $2 bucks on ebay and the 9g servos are so cheep that it just seemed like a good idea.

So here are the STL files for the feet, ratchets, legs and body/battery box mount.You can see the base unit in action on You Tube. https://www.youtube.com/watch?v=FSefJ1_X-xs

Part 2 here. https://www.youtube.com/watch?v=6vNu6KSr4UI&feature=youtu.be

Or follow the Project on Alphadrome. http://danefield.com/alpha/forums/topic/18899-alpha-strider-a-new-3d-printed-robot-project/

Print Settings

Printer:

Flash Forge Dreamer

Rafts:

No

Supports:

No

Resolution:

middle setting

Infill:

15 %

Notes:

I run about 210 C on my PLA prints I used Design Spark to make the 3d parts and Mesh Mixer to mirror some of the parts.