Lightning to 3.5mm Audio Dongle Holder

This is a holder for an Apple iPhone / iPad Lightning to 3.5mm Audio jack dongle / adapter.

It is rounded underneath to fit better on the side of iPhone cases, and has two small holes on one side that you can use with a stiff wire to make a clip. (Plastic printed clips just immediately break, do yourself a favor and use some metal for this part.)

You don't have to remove it from the holder to use it, the Lightning plug extends past the holder a bit.

The dongle should snap in. You may have to press a bit on the parts where the wire connects for them to snap it. I made it tight on purpose so they're compressed a bit and are held firmly. I didn't want the adapter popping out and getting lost.

I've included the Fusion 360 file so it should be easy to edit with that application

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

Doesn't Matter

Supports:

No

Resolution:

0.12mm

Infill:

20

Filament: Generic PLA

Notes:

I printed at 20mm/sec with full cooling and did not need supports underneath despite the overhang. You may want to try adding some supports if you're having issues. I recommend using a brim instead of skirt or rafts.